Cummins fault code · Crankcase and ventilation

Cummins fault code 1942

Crankcase Pressure: erratic or intermittent signal

J1939 SPN101
FMI2
LampAmber warning lamp
SystemCrankcase and ventilation

What it means

Cummins' description: Crankcase Pressure - Data erratic, intermittent or incorrect.

SPN 101 is Engine Crankcase Pressure. FMI 2 means the signal is jumping around, dropping in and out, or doesn't make sense compared to other readings.

The crankcase ventilation system relieves pressure from blow-by gases. The ECM monitors crankcase pressure, and some systems have a heated breather to keep it from freezing.

What the lamp means

An amber (yellow) warning lamp means the engine can usually keep running, but the fault should be repaired soon, ideally the same day.

How serious is it?

Green, yellow, red: three ways this can look

The same code can be a quick fix or a reason to shut down. Match your situation to the closest example.

Green

Keep an eye on it

A one-time crankcase code in freezing weather that cleared once warm.

Yellow

Schedule a repair

The code keeps returning or oil is seeping from seals. Service the breather soon.

Red

Stop and get help

Oil blowing out of the dipstick tube, heavy blow-by smoke, or a stop lamp. Shut it down. High crankcase pressure can mean serious internal wear.

Common causes

The sensor reading itself is out of range or the condition is real, so look at the system:

  • Plugged crankcase breather or filter
  • Frozen breather in cold weather
  • Disconnected ventilation hose
  • High blow-by from worn rings or a failing turbo

What you can check before calling

  • Check that the breather hose is connected and not kinked or frozen
  • Look for oil being pushed out of the dipstick tube or seals
  • Note heavy smoke from the breather tube

Clearing the code without fixing the cause usually brings it right back, and on emissions systems it can restart derate timers.

Engines and sources

Listed by Cummins for: QSB 6.7, QSL 9, QSX 15, QSB 4.5, QSG 12. Cummins uses the same fault code numbers across its electronic engines, including on-highway models like the ISB/B6.7, ISL/L9 and ISX/X15, though not every code applies to every engine or software level. Source: Cummins Tier 4 Fault Codes. Always confirm with Cummins service information (QuickServe) for your engine serial number.

Look up another code

Cummins fault code (like 1922), J1939 SPN and FMI (like SPN 3251 FMI 0), or an OBD-II code (like P0420).

Questions

What does Cummins fault code 1942 mean?

Cummins fault code 1942 is J1939 SPN 101 FMI 2: Crankcase Pressure - Data erratic, intermittent or incorrect. In plain terms: crankcase pressure: erratic or intermittent signal.

Can I keep driving with Cummins code 1942?

Usually for a short time, if the engine runs normally and no other warnings are on. Get it diagnosed soon, because many amber codes lead to a derate if ignored. Look at the green, yellow and red examples on this page to judge your situation.

What is the SPN and FMI for Cummins code 1942?

SPN 101 identifies the part or system (Engine Crankcase Pressure). FMI 2 describes the type of failure: erratic or intermittent signal.

What usually causes Cummins code 1942?

The most common causes are: plugged crankcase breather or filter; frozen breather in cold weather; disconnected ventilation hose.

Diesel down in the Midlands?

We work on Cummins-powered pickups, vans and medium-duty trucks across Lexington, Columbia and the Midlands, on site at your yard or roadside.

CallBook