Cummins fault code · Intake throttle and air shutoff

Cummins fault code 4484

Engine Air Shutoff: not responding / out of adjustment

J1939 SPN3667
FMI7
LampRed stop lamp
SystemIntake throttle and air shutoff

What it means

Cummins' description: Engine Air Shutoff - Mechanical System Not Responding or Out of Adjustment.

SPN 3667 is Engine Air Shutoff. FMI 7 means the ECM commanded something to move or change and it didn't respond the way it should: sticking, binding, worn, or out of adjustment.

Some Cummins engines have an electronic intake throttle to help regeneration and a smooth shutdown. Others have an air shutoff valve that can stop the engine in an emergency.

What the lamp means

A red stop lamp means Cummins treats this as serious. Stop the engine as soon as you can do it safely and get it checked before running it again.

How serious is it?

Green, yellow, red: three ways this can look

The same code can be a quick fix or a reason to shut down. Match your situation to the closest example. Cummins rates this a red stop lamp code, so if the red lamp is on, go by the red example.

Green

Keep an eye on it

An informational code reminding you a shutoff test is due.

Yellow

Schedule a repair

Rough running, slow regens, or throttle codes that keep coming back. Have it cleaned or replaced.

Red

Stop and get help

Engine shuts down or won't start because the air shutoff is closed or stuck. It needs a technician on site.

Common causes

The sensor reading itself is out of range or the condition is real, so look at the system:

  • Throttle plate sticking from soot and oil
  • Air shutoff tripped and not reset
  • Air shutoff maintenance test overdue

What you can check before calling

  • Check whether the air shutoff has been tripped and needs resetting
  • Look for oil and soot buildup at the intake throttle

Clearing the code without fixing the cause usually brings it right back, and on emissions systems it can restart derate timers.

Engines and sources

Listed by Cummins for: QSB 6.7, QSL 9. Cummins uses the same fault code numbers across its electronic engines, including on-highway models like the ISB/B6.7, ISL/L9 and ISX/X15, though not every code applies to every engine or software level. Source: Cummins Tier 4 Fault Codes. Always confirm with Cummins service information (QuickServe) for your engine serial number.

Look up another code

Cummins fault code (like 1922), J1939 SPN and FMI (like SPN 3251 FMI 0), or an OBD-II code (like P0420).

Questions

What does Cummins fault code 4484 mean?

Cummins fault code 4484 is J1939 SPN 3667 FMI 7: Engine Air Shutoff - Mechanical System Not Responding or Out of Adjustment. In plain terms: engine air shutoff: not responding / out of adjustment.

Can I keep driving with Cummins code 4484?

No. Cummins assigns this code a red stop lamp. Stop the engine as soon as it's safe and have it checked before running it again. Look at the green, yellow and red examples on this page to judge your situation.

What is the SPN and FMI for Cummins code 4484?

SPN 3667 identifies the part or system (Engine Air Shutoff). FMI 7 describes the type of failure: not responding / out of adjustment.

What usually causes Cummins code 4484?

The most common causes are: throttle plate sticking from soot and oil; air shutoff tripped and not reset; air shutoff maintenance test overdue.

Diesel down in the Midlands?

We work on Cummins-powered pickups, vans and medium-duty trucks across Lexington, Columbia and the Midlands, on site at your yard or roadside.

CallBook